Why manufacturing is the future of construction at Autodesk University in Seoul

If the ketchup has had time to set, then you may need a stronger cleaning product than washing up liquid.. Related Articles:.

Any loose dirt or other particles on the filter will escape into the air when it’s removed..Step 2: Locate and Remove the Shark Vacuum’s Filters.

have a pre-motor filter and a post-motor filter.The pre-motor filter is typically a combination of foam and felt, while the post-motor is either a foam or.Shark vacuums vary in design, so you should consult the user manual to find out where the removable filters are located.

Keep in mind that not all filters are washable, so check which ones are safe to clean.. As an example, the Shark NV702UK series has three washable filters: a foam filter, felt filter, and a post motor filter..The foam and felt pre-motor filters can be removed after taking out the dust canister..

The post motor filter is accessible via a filter door at the front of the machine..

This configuration is common to many Shark upright vacuums, but you should still check the manual.Step 4: Leave to Dry.

Leave the vinyl floor to dry.It won’t take too long, but it’s best not to walk on it while it’s drying.

You can open windows or use fans if you want to speed things along..If you can see puddles or you think the floor is too wet, use microfibre cloths or towels to dry the surface.