Adam Jordan

Using tape is particularly budget-friendly, as you can use one piece of tape multiple times to pick up hair.

Filters are one of the most important parts of a vacuum to clean.While most of the dirt picked up during vacuuming is caught in the canister, some gets stuck to the filter and forms a thin covering layer.

This layer can greatly reduce airflow and suction power.. Here’s how to clean the filters on a Dust Devil vacuum cleaner.Dirt Devil Versa Cordless.as an example, but make sure you check your instruction manual for specific instructions if you’re using a different model..

Put the vacuum into its upright position and make sure the vacuum isn’t charging..Hold the dirt cup, then press the release button.

You’ll then be able to remove the filter and filter housing from the top of the dust cup..

Empty the dust cup into an outdoor bin..There are also some basic Shark vacuums with only a single regular brush bar.. As a general rule, you can usually remove the soft roller from a DuoClean floorhead using a catch on the bottom of the floorhead.

If the bristle brush roll can be removed, you’ll be able to access it using a removable panel on the top of the floorhead.. On the Shark IZ251UK, you’ll need to use a coin to unlock the three locks for the base plate.Once this is removed, you’ll have easier access to the brush rolls.. Here’s how to clean your Shark’s brush rolls:.

Bristle brush roll.Snip and pull away any tangled hair or string from the brush roll with a pair of scissors.